high carbon steel的例句大全

By Cr microalloying, the fore eutectoid ferrite eduction is restrained, the distance between rows of pearlite is decreased, then the tensile strength, section shrinkage and drawing property of high carbon steel wire rod is obviously raised and improved.

高碳钢中加入的铬元素抑制先共析铁素体析出，减小珠光体片层间距，可明显提高抗拉强度，提高断面收缩率，改善线材的拉拔性能。

An introduction on Union Carbide Corporation Different spheroidizing technologies were applied to the hot-rolling ultra-high carbon steel by DET ( divorced eutectoid transformation).

联合碳化物公司利用离异共析原理，采用不同的热处理工艺球化热轧超高碳钢。

It is made of high quality-carbon steel, and rolled copper alloy as its surface.

以优质的低碳钢为基体,表面烧结锡青铜合金, 经过多次烧结轧制而成.

The results show that the low cycle fatigue properties of the wire is higher than that of high carbon Patenting steel wire.

结果得出，低碳低合金钢丝比高碳Patenting钢丝具有高的低周疲劳抗力，温形变处理又可提高低周疲劳寿命30%～35%。并对这种钢丝的低周疲劳损伤进行了评价。

Application of Electronic and Atomic Theory Calculation in the Alloy Design of High-Carbon Alloy Steel

电子和原子理论计算在高碳合金钢合金设计中的应用

Morphology and formation mechanism of white layer of annealed medium carbon steel under high energy impact load were estimated.

对退火45钢在高能冲击接触载荷下的白层形态及其形成机制进行了研究。

It is made of high quality low-carbon steel strip, rolled and sintered tin-lead-bronze alloy on surface.

该产品以优质低碳钢板为基体, 表面烧结铅青铜合金,经多次烧结轧制而成.

Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high& carbon steel. lime bright annealed wire

根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。中性介质中退火的钢丝

Up to now, the welding theory for high carbon alloy steel has not been well established.

迄今为止, 高碳合金钢材料的焊接理论仍未完善.

Antiwear properties of high carbon and silicon steel casting have been studied through trial abrasion test.

采用三体磨料磨损试验的方法,研究了等温淬火高碳高硅钢的抗磨性能.

High-carbon steel wire depended on importing because of homemade wire with a high BFD.

目前，国产热轧高碳盘条与国际先进水平的主要差距就表现在高断丝率上。

Regression Curve and Testing of D2 type High-Carbon-and-High-Chromium Steel Carbides' Homogeneity

D2型高碳高铬钢碳化物均匀性的回归与检验

Than with ordinary carbon steel knives , high-speed steel tool life 10 times the number of advantages.

具有比普通碳钢刀具, 高速钢 刀具耐用数10倍的优点.

E pure carbon as the standard sample and helped by the ZAF correction method, it is also applicable to the carbon content analysis of the carbide phases in high alloy steel.

用纯碳作标样，再以ZAF法修正计算，可用于高合金钢的碳化物相的碳量分析。

The weld quality of upset butt welding of high carbon steel wire is the key to guaranteeing to produce and get the high-quality steel wire.

高碳钢盘条焊接区质量是影响高应力钢绞线性能充分发挥的关键因素。

The results showed that the corrosion weight loss rate of high Mn steel was distinctly greater than that of medium carbon chromium steel. The high Mn steel caustic embrittlement cracking was distinct in corrosion.

结果表明，高锰钢的平均腐蚀速率显著高于中碳铬合金钢，腐蚀过程中高锰钢有较严重的碱脆开裂现象。

Wwlding material: low carbon steel , high strength steel, medium carbon steel, low steel.

可焊接材料: 低碳钢 、 强度钢 、 碳钢 、 合金钢.

Weldable materials: low carbon steel, high-strength steel, medium-carbon steel, low-alloy steel .

可焊材料: 低碳钢 、 高强度钢 、 中碳钢, 低合金钢.

Fiberglass-Reinforced Plastic ( FRP) made from Epoxy Vinyl Ester Resin will be compared to acid brick and rubber-lined carbon steel and high alloy clad carbon steel as well as resin coated carbon steel in corrosive flue gas applications.

本文比较了环氧乙烯基玻璃钢（FRP）与碳钢衬耐酸砖和衬橡胶、碳钢覆合高镍合金以及碳钢衬树脂胶泥在腐蚀性烟气方面的应用。